HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 475)

Log file
The installux.sh utility outputs execution information to the log
file /var/tmp/hdlm_installux_sh.log. If the hdlm_installux_sh.log log
file already exists, the utility appends execution information onto the end of
the log file.
If the size of the log file is equal to or greater than 1 MB when the utility is
executed, the log file is renamed to hdlm_installux_sh2.log, and a new log
file is created and named hdlm_installux_sh.log, to which the execution
information is output.
Note
The hdlm_installux_sh.log and hdlm_installux_sh2.log log files are not
deleted when HDLM is removed. Manually delete the log files, if they are no
longer required.
Note
• If VxVM is installed on the host, do not use the -r option or the -t option.
Perform the installation without specifying any options.
After the installation has finished, perform the following steps to configure
the HDLM device:
¢
Execute the following dlmsetconf utility:
# /opt/DynamicLinkManager/bin/dlmsetconf
¢
To disable devices in VxVM, follow the procedure outlined in Removing
Devices from VxVM on a Controller Basis on page 3-162 or Removing
Devices From VxVM on a Path Basis on page 3-166 of Removing
Devices from VxVM on page 3-160 .
¢
To activate the settings and to make the host recognize HDLM
devices, restart the host with the reconfiguration option specified.
Execute one of the following commands:
# reboot -- -r
At the ok prompt, execute the following:
boot -r
• If HDLM devices are used in a cluster (such as VCS or Sun Cluster (Oracle
Solaris Cluster)), do not use the -r option or the -t option.
Perform the installation without specifying any options.
After the installation has finished, perform the following steps to configure
the HDLM device:
¢
Execute the following dlmsetconf utility:
# /opt/DynamicLinkManager/bin/dlmsetconf
¢
To activate the settings and to make the host recognize HDLM
devices, restart the host with the reconfiguration option specified.
Execute one of the following commands:
Utility Reference
7-45
Hitachi Dynamic Link Manager (for Solaris) User Guide