HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 389)

Parameter
and program
information
to be
displayed
Item Description
extended load
balancing
If you used Global Link Manager to set the number of
times the same path can be used in units of LUs, an
asterisk (*) is added after the value.
-pstv
The display-of-
the-physical-
storage-
system-
information
setting
Physical
Storage View The value of the display-of-the-physical-storage-
system-information setting is displayed.
on: Enabled
off: Disabled
#
When you use cluster software, the settings of the cluster support
function and the kinds of cluster servers are not displayed. However, the
cluster support function will operate normally.
Examples
Example 1
The following example shows how to display information about the HDLM
function settings:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 2
The following example shows how to display information about the HDLM
manager:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name
Command Reference
6-41
Hitachi Dynamic Link Manager (for Solaris) User Guide