HP Hitachi Dynamic Link Manager Software Licenses User Manual

Page 361

Advertising
background image

Specify the host port number and bus number of the target HBA port: the

numbers are found in the PathName field displayed using the view

operation. Enter a period between these two parameter values. For

details on the view operation, see

view (Displays Information) on page

6-34

.

Example

The following example shows how to place online all paths connected

to the HBA port whose host port number is 0001 and bus number is
0000:
When the confirmation message is displayed, the user enters y to

continue, or n to cancel the operation.

# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000

KAPL01057-I All the paths which pass the specified HBA will

be changed to the Online status. Is this OK? [y/n]:y

KAPL01061-I 3 path(s) were successfully placed Online; 0

path(s) were not. Operation name = online

#

-hbaid HBA-port-ID

Use this parameter to place online, at one time, all paths that pass

through a specific HBA port. The command will place online all paths

connected to the HBA port that has the specified HBA-port-ID. To display

the HBA port IDs, execute the following view operation:

# /opt/DynamicLinkManager/bin/dlnkmgr view -hba

For details about how to execute the view operation to display the HBA

port IDs, see

To display HBA port information on page 6-70

in

Parameters on page 6-36

.

Example

The following example shows how to place online all paths connected

to the HBA port whose HBA-port-ID is 00001.

# /opt/DynamicLinkManager/bin/dlnkmgr online -hbaid 00001

KAPL01104-I All the paths which pass the specified HBA port

will be changed to the Online status. Is this OK? [y/n]:y

KAPL01061-I 15 path(s) were successfully placed Online; 0

path(s) were not. Operation name = online

#

-cha -pathid AutoPATH_ID

Use this parameter to simultaneously place online all paths that pass

through a specific CHA port. The command will place online all paths that

pass through the CHA port in the path specified by the -pathid

parameter. Paths that pass through a specific physical CHA port on a

physical storage system will be online.

Command Reference

6-13

Hitachi Dynamic Link Manager (for Solaris) User Guide

Advertising
This manual is related to the following products: