HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 510)

Message
ID
Message Text Explanation
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL04003
-E
The startup parameter is invalid. Details
The HDLM manager internal
parameter is invalid.
Action
Execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL04004
-I
HDLM manager will now terminate. Action
None.
KAPL04008
-E
Cannot open the option definition
file (aa...aa).
Details
HDLM manager could not start
normally because it was unable
to open the option definition file.
aa...aa: Option definition file
name
Action
Check whether another program
is currently using this file (for
example, the file is being opened
in a text editor), or whether the
file has been inadvertently
deleted.
KAPL04009
-E
The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then
check the option settings.
8-34
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide