HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 504)

Message
ID
Message Text Explanation
KAPL01162
-I
A path was added. (path ID =
aa...aa, storage = bb...bb, iLU =
cc...cc)
Details
This message displays
information about a path added
as the result of an add operation.
aa...aa: path ID of the added
path
bb...bb: storage (vendor
ID.product ID.serial number) to
which the added path is
connected
cc...cc: LU number to which the
added path is connected
Action
Use the view operation of the
HDLM command (dlnkmgr) to
verify information about the
added paths.
KAPL01163
-E
The path configuration change
failed. (details = aa...aa)
Details
This message indicates that an
add operation failed.
aa...aa: code indicating the
content of the error
Action
Execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or, if you have
a maintenance contract for HDLM,
the maintenance company.
KAPL01166
-I
If you execute this operation, the
specified number of times that the
same path can be used for
individual LUs will become invalid.
Do you want to execute the
operation anyway? Operation name
= set [y/n]:
Details
The specified number of times
that the same path can be used
for individual LUs will become
invalid. To continue the
operation, enter y. To cancel the
operation, enter n.
Action
If you want to change the
number of times that the same
path can be used for the system,
enter y. To cancel the operation,
enter n.
KAPL01167
-I
All paths will be set to Online or
Online(D). Is this OK? [y/n]: Details
All paths will be set to Online or
Online(D) because no path is
specified. To continue, enter y. To
cancel the operation, enter n.
Action
8-28
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide