HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 499)

Message
ID
Message Text Explanation
or -chaid parameter was
specified. To collectively place
multiple paths Online, enter y. To
not collectively place them
Online, enter n.
aa...aa: CHA, HBA
Action
If you want to execute the Online
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
KAPL01107
-I
The load balancing type specified
for individual LUs will become
invalid when this operation is
executed. Do you want to execute
the operation anyway? Operation
name = set [y/n]:
Action
If you want to change the load
balancing algorithm for the
system, enter y. If you want to
terminate processing, enter n.
KAPL01112
-E
An attempt to connect to the HDLM
driver has failed. Operation name =
aa...aa
Details
HDLM driver information must be
collected to execute the given
HDLM command, but the HDLM
driver cannot be accessed.
aa...aa: Specified operation name
Action
Execute the utility for collecting
HDLM error information
(DLMgetras) to collect the error
information, and then contact
your HDLM vendor or
maintenance company if there is
a maintenance contract for HDLM.
For details on the DLMgetras
utility, see The DLMgetras Utility
for Collecting HDLM Error
Information on page 7-3 .
KAPL01114
-W
The audit log configuration file does
not exist. Restart the HDLM
Manager, and execute the "dlnkmgr
view -sys -audlog" command and
check the setting.
Details
The audit log configuration file
does not exist.
Action
Restart the HDLM Manager, and
execute the "dlnkmgr view -sys
-audlog" command, and then
specify the desired setting by
using the "dlnkmgr set -
audlog" command or the
"dlnkmgr set -audfac"
command as necessary.
Messages
8-23
Hitachi Dynamic Link Manager (for Solaris) User Guide