HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 252)

6
.
Use the following command to unmount all mount points that are using
HDLM:
# umount mount-point
7
.
If HDLM devices are being used in Solaris 10 ZFS, execute the following
command to export all ZFS storage pools that are using HDLM:
# zpool export pool-name
8
.
Edit the /etc/vfstab file.
In the /etc/vfstab file, delete or comment out the specifications of the
logical device files for the HDLM devices (cUtXdYsZ) and the ZFS file
system whose configurations you want to change, and then release the
setting for automatic mounting.
9
.
Unregister HDLM-managed devices from the volume management
software.
If any HDLM-managed devices are registered in the volume management
software, unregister them.
Remove Solaris Cluster Settings
If you are using Sun Cluster, before you remove HDLM, perform the following
to remove the disk device group settings and the Quorum device settings.
If you are using SDS or SVM, delete the disk device group to which the
disksets that use HDLM belong to unregister them. If you are using SDS, see
Remove SDS Settings on page 3-189 of Preparations for HDLM Removal on
page 3-185 . If you are using SVM, see Remove SVM Settings on page 3-190
of Preparations for HDLM Removal on page 3-185 . Unregistering a diskset
deletes data in the diskset. Make sure that you first back up the data. If you
are using VxVM, delete the disk device group, delete the disk device group
that contains the disk group that uses HDLM to unregister the disk group.
The following procedure shows how to unregister a disk group.
To unregister a disk group:
1
.
Place the disk device group offline.
# /usr/cluster/bin/scswitch -F -D disk-device-group-name
2
.
Start the scsetup utility.
# /usr/cluster/bin/scsetup
3
.
Enter 5 (Device group and volumes) to work with VxVM disk device
groups.
Device Group Menu is displayed.
4
.
To unregister a VxVM disk device group, enter 3 (Unregister a VxVM
device group).
3-186
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide