HP Hitachi Dynamic Link Manager Software Licenses User Manual

Page 317

Advertising
background image

Changing an HDLM-managed Device to a Non-HDLM-Managed Device

To change an HDLM-managed device to a non-HDLM-managed device:

1

.

Check the LDEV information of the LU to be removed from HDLM

management.
Use the following command to check the LDEV information:

# /opt/DynamicLinkManager/bin/dlnkmgr view -drv

PathID HDevName Device LDEV

000000 c7t0d0 sd46 9970/9980.15001.066A

000001 c7t0d0 sd47 9970/9980.15001.066A

000002 c7t0d0 sd48 9970/9980.15001.066A

...

#

KAPL01001-I The HDLM command completed normally. Operation name

= view, completion time = yyyy/mm/dd hh:mm:ss

2

.

Edit the HDLM driver unconfiguration definition file (/opt/
DynamicLinkManager/config/dlmfdrv.unconf).
Referring to step 1 in

Using the HDLM Device Unconfiguration Function

When Performing a New Installation of HDLM on page 3-72

, use a text

editor to edit the HDLM driver unconfiguration definition file (/opt/
DynamicLinkManager/config/dlmfdrv.unconf).

3

.

Apply the settings in the HDLM driver unconfiguration definition file

(/opt/DynamicLinkManager/config/dlmfdrv.unconf) to the HDLM

driver configuration file (/kernel/drv/dlmfdrv.conf).
Execute following the dlmsetconf utility for creating the HDLM driver

configuration definition file to apply the settings in the HDLM driver

unconfiguration definition file (/opt/DynamicLinkManager/config/
dlmfdrv.unconf) to the HDLM driver configuration definition file (/
kernel/drv/dlmfdrv.conf):

# /opt/DynamicLinkManager/bin/dlmsetconf -u

4

.

Restart the host, with the reconfiguration option specified:

# reboot -- -r

Changing a Non-HDLM-Managed Device to an HDLM-Managed Device

To change a non-HDLM-managed device to an HDLM-managed device:

1

.

Check the LU and its disk label to be managed by HDLM.
Use the format command to check the information for each path of the

LU to be managed by HDLM and verify that the disk label is specified. The

following figure shows an example of the format command:

HDLM Operation

4-49

Hitachi Dynamic Link Manager (for Solaris) User Guide

Advertising
This manual is related to the following products: