HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 131)

cdrom/cdrom0
12
.
Perform the installation.
¢
If you are not performing an unattended installation of HDLM, execute
either of the following installation commands:
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh
When executing the installhdlm command
# DVD-ROM-mount-point/HDLM_Solaris/installhdlm
¢
If you are performing an unattended installation of HDLM, set the
installation-information settings file with the -f option specified as
shown below.
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh -f /any-directory/
installation-information-settings-file
When executing the installhdlm utility
# DVD-ROM-mount-point/HDLM_Solaris/installhdlm -f /any-
directory/installation-information-settings-file
If execution of the utility is completed without problems, the
KAPL09211-I message is output.
After confirming that the KAPL09211-I message has been output,
execute the following command to delete the installation-information
settings file:
# rm -r /any-directory/installation-information-settings-
file
If the driver_config key is set to n (so that the dlmsetconf utility is
not executed) in the installation-information settings file, go to step
15.
If the driver_config key is set to y (to execute the dlmsetconf
utility) in the installation-information settings file, go to step 17.
13
.
Continue by following the instructions displayed on the screen:
If the license key file named /var/tmp/hdlm_license is not saved, a
message, showing whether a user-specified license key file has been
saved, is output. Enter 1 if a user-specified license key file has been
saved. Enter 2 if a license key is specified directly.
¢
Note that if any value other than 1 or 2 is entered three times, the
installation is stopped.
If 1 is entered, specify a user-specified license key file with the absolute
path.
¢
Note that if the wrong absolute path is entered three times, the
installation is stopped.
If 2 is entered, a message that prompts you to enter a license key is
displayed. Enter the license key.
Creating an HDLM Environment
3-65
Hitachi Dynamic Link Manager (for Solaris) User Guide