HP Hitachi Dynamic Link Manager Software Licenses User Manual

Page 329

Advertising
background image

message is not output next time the node starts. For details, refer to

the Sun Cluster documentation.

14

.

Execute the dlnkmgr command's view operation on all nodes in the

cluster, and display the status of each program.
The following shows an example of executing the command:

# /opt/DynamicLinkManager/bin/dlnkmgr view -sys

HDLM Version : x.x.x-xx

Service Pack Version :

Load Balance : on(extended lio)

Support Cluster :

Elog Level : 3

Elog File Size (KB) : 9900

Number Of Elog Files : 2

Trace Level : 0

Trace File Size(KB) : 1000

Number Of Trace Files : 4

Path Health Checking : on(30)

Auto Failback : on(1)

Intermittent Error Monitor : off

Dynamic I/O Path Control : off(10)

HDLM Manager Ver WakeupTime

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss

HDLM Alert Driver Ver WakeupTime ElogMem Size

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4096

HDLM Driver Ver WakeupTime

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss

License Type Expiration

Permanent -

KAPL01001-I The HDLM command completed normally. Operation name

= view, completion time = yyyy/mm/dd hh:mm:ss

#

¢

Even when cluster software is used, it is not displayed in Support
Cluster. Nevertheless, no problem exists with the functionality for

cluster support.

15

.

Use the execution results from the view operation to check that the

programs are operating normally.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,

the programs are operating normally.

16

.

Check the status of the path for accessing the LU to be managed by

HDLM.
The following shows an example of executing the command. The shaded

portion is the path accessing the LU to be managed by HDLM.

HDLM Operation

4-61

Hitachi Dynamic Link Manager (for Solaris) User Guide

Advertising
This manual is related to the following products: