HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 523)

Message
ID
Message Text Explanation
how to execute the dlmsetconf
command.
bb...bb: Instance number
(decimal number)
Action
Check whether the path is
correctly connected to the disk.
Execute the dlmsetconf utility
for creating the HDLM driver
configuration definition file, and
then reboot the host.
KAPL05451
-I
The path (aa...aa) has been deleted. Details
The dynamic LU deletion
function deleted a path
connected to the LU that was
deleted.
aa...aa: Path ID
Action
None.
KAPL05452
-W
The path (aa...aa) could not be
deleted. Code = bb...bb. Stop any
applications that are using the HDLM
devices, and then re-execute the
dlmcfgmgr utility.
Details
The path (aa...aa) could not be
deleted because the LU was in
use.
aa...aa: Path ID
bb...bb: Error information
(internal code)
Action
Stop any applications that are
using the HDLM devices, and
then re-execute the dlmcfgmgr
utility for managing the HDLM
configuration.
KAPL05453
-I
Path geometry information was
recovered.(PathID=aa...aa)
Details
Path geometry information was
recovered.
aa...aa:PathID
Action
None
KAPL05514
-W
The label might be invalid or there
might be a problem with the slice to
be mounted.
Details
The label might be invalid or
there might be a problem with
the slice to be mounted.
Action
If the mounted LU is UFS, check
the mounted slice. In all other
cases, the created label might be
invalid. Check the label. Check
the mounted slice and label, and
note that even if there are no
Messages
8-47
Hitachi Dynamic Link Manager (for Solaris) User Guide