HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 498)

Message
ID
Message Text Explanation
Action
None.
KAPL01101
-W
The target HBA port was not found.
Operation name = aa...aa
Details
The HBA having the HBA_ID
specified in the -hbaid parameter
could not be found.
aa...aa: monitor, offline,
online
Action
Use the view operation of the
HDLM command (dlnkmgr view
-hba) to check the target HBA
port and the HBA_ID of the target
HBA port. After that, specify the
appropriate HBA_ID, and then
retry.
KAPL01102
-I
All the paths which pass the
specified aa...aa port will be
changed to the Offline(C) status. Is
this OK? [y/n]:
Details
Multiple paths will be collectively
placed Offline(C) because the -
hbaid or -chaid parameter was
specified. To collectively place
multiple paths Offline(C), enter y.
To not collectively place them
Offline(C), enter n.
aa...aa: CHA, HBA
Action
If you want to execute the offline
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
KAPL01103
-I
If you are sure that there would be
no problem when all the paths
which pass the specified aa...aa
port are placed in the Offline(C)
status, enter y. Otherwise, enter n.
[y/n]:
Details
This message re-asks the user
whether to place all the paths
Offline(C). To place all the paths
Offline(C), enter y. To not place
them Offline(C), enter n.
aa...aa: CHA, HBA
Action
If you want to execute the offline
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
KAPL01104
-I
All the paths which pass the
specified aa...aa port will be
changed to the Online status. Is
this OK? [y/n]:
Details
Multiple paths will be collectively
placed Online because the -hbaid
8-22
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide