HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 120)

# zoneadm list -cv
ID NAME STATUS PATH
BRAND IP
0 global running /
solaris shared
1 non-globalzone running /zones/non-globalzone
solaris excl
2
.
If the status is running, shut down the non-global zone and change the
status to installed.
# zoneadm -z non-globalzone shutdown
# zoneadm list -cv
ID NAME STATUS PATH
BRAND IP
0 global running /
solaris shared
1 non-globalzone installed /zones/non-globalzone
solaris excl
3
.
Detach the non-global zone.
# zoneadm -z non-globalzone detach
4
.
Install HDLM.
5
.
Attach and activate the non-global zone.
# zoneadm -z non-globalzone attach
# zoneadm -z non-globalzone boot
Preparation for Performing an Unattended Installation of HDLM
An unattended installation is an installation in which HDLM is installed based
on the responses predefined in the installation-information settings file
instead of user responses. The following shows the processing flow of
unattended installation:
1
.
Define information necessary for installing HDLM in the installation-
information settings file.
#
2
.
Use the installux.sh script or the HDLM installation utility
(installhdlm) to start installation.
3
.
The necessary responses are automatically determined based on the
installation-information settings file.
4
.
Installation is completed. Log data about the progress and result of
installation is output.
#
If you want to use the sample file (sample_installhdlm.conf), copy it
from the DVD-ROM to the desired directory. You can change the file
name. The following example shows how to copy the file by changing its
name:
# cp -p /cdrom/cdrom0/HDLM_Solaris/hdlmtool/instutil/
3-54
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide