HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 459
•
If you want HDLM to manage a device that is not currently managing,
comment out the LDEV line (add a hash mark (#) at the beginning of the
line) of the definitions for the desired LU in the HDLM driver
unconfiguration definition file (/opt/DynamicLinkManager/config/
dlmfdrv.unconf), specify the reconfiguration option, and then restart the
host.
•
When you specify that a device is, or is not, to be managed by HDLM, edit
the HDLM driver unconfiguration definition file (/opt/
DynamicLinkManager/config/dlmfdrv.unconf) to execute the
dlmsetconf utility with the -u option specified, and then restart the host.
•
If the below message appears after you execute the dlmsetconf utility, it
means that the device ID could not be acquired from the SCSI driver. If
this happens, restart the host and then re-execute the dlmsetconf utility.
KAPL10237-E The property information (devid) on a device
(aa...aa) could not be collected.
aa...aa: sd or ssd device name
If the device ID cannot be acquired from the SCSI driver, refer to the bug
report for Bug ID 4897065 provided by My Oracle Support (https://
support.oracle.com/) for more information. To view the bug report, you
need a My Oracle Support account.
Items in the storage-system-migration definition file
This subsection describes the items that are defined in the storage-system-
migration definition file (/opt/DynamicLinkManager/config/
dlmmiginfo.conf).
Each entry in the file consists of the following elements, each of which is
separated with a space.
•
before-SerialNo: Sets the serial number of a storage device in the
source storage system.
•
before-iLU: Sets an internal LU number in the source storage system.
•
after-SerialNo: Sets the serial number of a storage device in the
destination storage system.
•
after-iLU: Sets an internal LU number in the destination storage
system.
Configure the above settings by referring to the storage-system-migration
definition sample file (/opt/DynamicLinkManager/config/
sample_dlmmiginfo.conf).
The following shows the contents of the sample file.
Utility Reference
7-29
Hitachi Dynamic Link Manager (for Solaris) User Guide