The installhdlm utility for installing hdlm, The installhdlm utility for installing hdlm -33, Utility, see – HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 463
physical paths. Thus, executing the dlmvxexclude utility outputs
entries for HDLM devices that have not actually been created.
Entries for these devices are output for each LU, and are sorted in
alphabetic order, using the logical device file name as a key.
exclude_all 0
paths
c3t0d10s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,a
c3t0d11s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,b
c3t0d12s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,c
c3t0d13s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,d
c4t1d10s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,a
c4t1d11s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,b
c4t1d12s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,c
c4t1d13s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,d
c6t1d10s2 /pseudo/dlmndrv@2/dlmfdrv@1,a
c6t1d11s2 /pseudo/dlmndrv@2/dlmfdrv@1,b
c6t1d12s2 /pseudo/dlmndrv@2/dlmfdrv@1,c
c6t1d13s2 /pseudo/dlmndrv@2/dlmfdrv@1,d
#
controllers
#
product
#
pathgroups
#
Note
•
Only a user with root permissions can execute the dlmvxexclude utility
for assisting creation of the VxVM configuration file.
•
After installing HDLM, you need to execute the dlmvxexclude utility after
executing the dlmsetconf utility for creating the HDLM driver
configuration definition file.
•
Do not use the output result of the dlmvxexclude utility as is for the
vxvm.exclude file. If a device other than the HDLM-managed devices has
already been invalidated in VxVM, then the invalidated setting might be
canceled.
The installhdlm Utility for Installing HDLM
You can use the installhdlm utility to perform a new installation, upgrade
installation, reinstallation, or silent installation of HDLM. You must predefine
how the utility is to respond during installation in the installation-information
settings file.
Solaris 11 has functionality to create a new boot environment.HDLM,
however, can be installed only in the current boot environment.
For details on the procedure for performing an unattended installation, see
Performing a New Installation of HDLM (When Solaris Cluster Is Not Being
Utility Reference
7-33
Hitachi Dynamic Link Manager (for Solaris) User Guide