HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 517)

Message
ID
Message Text Explanation
KAPL04054
-I
The owner controller will now be
revised. (number of LUs = aa...aa)
Details
aa...aa: number of targeted LUs
Action
None.
KAPL04055
-I
The owner controller was revised.
(number of changed LUs = aa...aa)
Details
aa...aa: number of changed LUs
Action
None.
KAPL04056
-W
The owner controller cannot be
revised because no paths are in the
Online status. (LU = aa...aa)
Details
aa...aa: ID (serial number +
iLUN) of the LU that was not
revised
Action
Recover the paths from the
failure, and then place them in
the Online status, or exclude the
LU from dynamic I/O path
control.
KAPL05001 to KAPL06000
Message
ID
Message Text Explanation
KAPL05003
-I
The HDLM driver (filter component)
was successfully attached to Disk
(aa...aa), Partition (bb...bb).
Details
The path for the disk and
partition was registered
successfully in the core logic.
aa...aa: minor number of the sd
or ssd device (decimal number)
bb...bb: slice number
Action
None.
KAPL05008
-E
Could not allocate memory.
(aa...aa:bb...bb) Execute the
DLMgetras utility to collect error
information, and then contact your
vendor or maintenance company.
Refer to the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
Details
The OS memory reservation
function started but returned an
error.
aa...aa: File ID, line number
(hexadecimal number)
bb...bb: Target memory size
(hexadecimal number)
Action
Check whether the HDLM driver
has started normally. If it has
Messages
8-41
Hitachi Dynamic Link Manager (for Solaris) User Guide