JLG 510AJ Service Manual - Manual (Page 367)

SECTION 6 - JLG CONTROL SYSTEM
3121181 – JLG Lift – 6-85
8/5 Flash code 8/5 indicates problems with the moment or load pin
system. Only occur on machines with moment or load pin con-
trol. An EMS cycle is required. 10
MOMENT PIN HORIZONTAL FORCE OUT
OF RANGE The horizontal force is out of the allowed range.
MOMENT PIN VERTICAL FORCE OUT OF
RANGE The vertical force is out of the allowed range.
LOAD PIN HORIZONTAL FORCE OUT OF
RANGE The horizontal force is out of the allowed range.
LOAD PIN VERTICAL FORCE OUT OF
RANGE The vertical force is out of the allowed range.
MOMENT PIN SENSOR FAULT The moment pin has reported a fault flag.
LOAD PIN SENSOR FAULT The load pin has reported a fault flag.
NEW MOMENT PIN DETECTED FAULT A moment pin was detected on the system different from the one
used to calibrate the machine.
NEW LOAD PIN DETECTED FAULT A load pin was detected on the system different from the one used to
calibrate the machine.
Table 6-9. Help Fault Codes, Displayed Faults, and Descriptions
Fault Flash
Code
Analyzer Display Description Priority