JLG 510AJ Service Manual - Manual (Page 377)

SECTION 7 - BASIC ELECTRICAL INFORMATION AND ELECTRICAL SCHEMATICS
3121181 – JLG Lift – 7-5
3. After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release locking latches by squeezing them inward (See
Figure 7-8.). 4. Slide wedge lock into housing until it is flush with the
housing (See Figure 7-9.).
Figure 7-7. Connector Assembly Figure 2
Figure 7-8. Connector Assembly Figure 3
Figure 7-9. Connector Assembly Figure 4