Tool list, Tool list -41 – JLG 510AJ Service Manual User Manual
Page 83
SECTION 3 - CHASSIS AND TURNTABLE
3121181
– JLG Lift –
3-41
Tool List
The following
specialized tools are used to assemble this unit.
Tool diagrams included in this manual are intended for the
customer who may wish to have a tool made. All tools exist as
one piece and must be made from mild steel All dimensions
are given in inches.
NOTE:
To improve tool life, tools may be carburized and hard-
ened. If this is done, tools must be ground on all surfaces
labeled with a "G" on the tool diagram.
1.
T-118126 SEAL PRESSING TOOL for SEAL (1B).
2.
T-138903 ASSEMBLY PRESSING TOOL for CUP (1C)
3.
T-140433 ASSEMBLY PRESSING TOOL for CUP (1E)
4.
T-109691 ASSEMSLY PRESSING TOOL for CONE (1F)
* These tools are for specific seals, cups or cones. There is a
specific tool for each cup and cone.