RKI Instruments Gas Tracer User Manual
Page 102
94 • Start Up, Bar Hole Mode
Gas Tracer Operator’s Manual
The alarm LED’s and buzzer will pulse several times. After
this, press the RESET SILENCE button until you hear a beep to
continue.
•
If the unit is due for a bump test and BP EXPRD is set to NOT
USE, then the following screen displays.
The Gas Tracer cannot be used until a bump test has been
performed by selecting BUMP in the Maintenance Mode
menu. See “Performing a Bump Test” on page 129 for bump
testing instructions.
•
If a bump test is not due or BP EXPRD is set to NO EFFECT,
then the following screen appears for a few seconds indicating
when the next bump test is due.
NOTE:
If both CL RMNDR and BP RMNDR are turned off, a WARM
UP screen will display before the warm up sequence
continues.
FAIL
B--LIMIT
2011
9
30
10d
NEXTBUMP