RKI Instruments Gas Tracer - Manual (Page 113)

Gas Tracer Operator’s Manual Start Up, Leak Check Mode • 105
page 129 for bump testing instructions.
• If a bump test is not due or BP EXPRD is set to NO EFFECT,
then the following screen appears for a few seconds indicating
when the next bump test is due.
NOTE: If both CL RMNDR and BP RMNDR are turned off, a WARM
UP screen will display before the warm up sequence
continues.
8. If ID DISP is turned on (see page 167), the User ID Screen displays
for a few seconds and then the Station ID Screen displays for a few
seconds.
2011
9
30
10d
NEXTBUMP
U Id
- - - - - - - -
S Id
- - - - - - - -