RKI Instruments Gas Tracer - Manual (Page 31)

Gas Tracer Operator’s Manual Start Up, Normal Mode • 23
continue.
• If the unit is due for a bump test and BP EXPRD is set to NOT
USE, then the following screen displays.
The Gas Tracer cannot be used until a bump test has been
performed by selecting BUMP in the Maintenance Mode
menu. See “Performing a Bump Test” on page 129 for bump
testing instructions.
• If a bump test is not due or BP EXPRD is set to NO EFFECT,
then the following screen appears for a few seconds indicating
when the next bump test is due.
NOTE: If both CL RMNDR and BP RMNDR are turned off, a WARM
UP screen will display before the warm up sequence
continues.
FAIL
B--LIMIT
2011
9
30
10d
NEXTBUMP