RKI Instruments Gas Tracer - Manual (Page 53)

Gas Tracer Operator’s Manual Display Mode • 45
2. Once the warm up sequence is complete, the Normal Operation
Screen will display and INERT will appear along the bottom of the
display.
3. Since the oxygen concentration in fresh air is above both oxygen
alarm points, the Gas Tracer will go into alarm if turned on in a
fresh air environment.
Display Mode
This section describes using the Gas Tracer in Display Mode. With the
Gas Tracer in Display Mode, you can:
• set the combustible gas channel range
• display peak readings
• display STEL and TWA readings (CO only)
• display full scale, warning, alarm, STEL (CO only), and TWA (CO
only) values
• display time in operation
• display the date and time
• display remaining log time
• clear the data logger
• turn the pump on or off
• select a user ID
• select a station ID
• display snap logging data
• turn peak bar function on or off
To enter Display Mode, press and release the DISPLAY (ADJ) button
while in Measuring Mode. To scroll from one screen to the next press
and release the DISPLAY (ADJ) button.
0
20.9
0
%LEL
%
ppm
CH
4
O
2
INERT
CO