Rockwell Automation 20M LPM15 Liquid-Cooled Adjustable Frequency AC Drive FRN 2.xxx - Manual (Page 139)

Index-3
Direction Mode parameter, 3-19
Direction Owner parameter, 3-26
Discrete Speeds Parameter Group, 3-12
displacement power factor, B-1
distribution systems
unbalanced, 1-12
ungrounded, 1-12
Dowtherm, 1-18
DPI Baud Rate parameter, 3-25
DPI communication port, 1-8, C-1
DPI Data Rate parameter, 3-25
DPI port location, 1-8, C-1
drive
alarms and faults, 4-1
applying power, 2-1
dimensions and weights, 1-8 to 1-11
grounding, 1-15
lifting and mounting, 1-13
power loss watts rating, 1-14
status indicator, 2-2, 4-2
Drive Alarm 1 parameter, 3-21
Drive Alarm 2 parameter, 3-21
Drive Checksum parameter, 3-20
Drive Data Parameter Group, 3-6
Drive Logic Rslt parameter, 3-25
Drive Memory Parameter Group, 3-19
Drive OL Count parameter, 3-22
Drive OL Level alarm, 4-7
Drive OL Mode parameter, 3-15
Drive Overload fault, 4-3
Drive Powerup fault, 4-3
Drive Ramp Rslt parameter, 3-25
Drive Ref Rslt parameter, 3-25
Drive Status 1 parameter, 3-20
Drive Status 2 parameter, 3-20
Drive Temp parameter, 3-22
DriveExecutive, editing parameters, 3-1
DriveExplorer, editing parameters, 3-1
dynamic brake
resistor selection, 3-16
setup, 3-16
Dynamic Control File, 3-15
E
earthing, see grounding
editing parameters using DriveExplorer, 3-1
Elapsed MWh parameter, 3-6
Elapsed Run Time parameter, 3-6
enclosure ratings, 1-2
ESD, static discharge, P-2
ethylene glycol coolant, 1-19
Excessive Load fault, 4-3
F
fault
clearing, 4-3
descriptions, 4-3
queue, C-3
types, 4-1
Fault Amps parameter, 3-22
Fault Bus Volts parameter, 3-22
Fault Clear Mode parameter, 3-23
Fault Clear parameter, 3-23
Fault Clr Mask parameter, 3-26
Fault Clr Owner parameter, 3-26
Fault Config x parameter, 3-23
Fault Frequency parameter, 3-22
Fault x Code parameter, 3-24
Fault x Time parameter, 3-24
Faults
Analog In Loss, 4-3
Anlg Cal Chksum, 4-3
Auto Rstrt Tries, 4-3
AutoTune Aborted, 4-3
Auxiliary Input, 4-3
DB Resistance, 4-3
Decel Inhibit, 4-3
Drive Overload, 4-3
Drive Powerup, 4-3
Excessive Load, 4-3
Faults Cleared, 4-3
Flt QueueCleared, 4-3
FluxAmpsRef Rang, 4-3
Gate Kill, 4-3
Ground fault, 4-3
Hardware fault, 4-3
Heatsink OvrTemp, 4-4
HW OverCurrent, 4-4
I/O Comm Loss, 4-4
I/O Failure, 4-4
Incompat MCB-PB, 4-4
IR Volts Range, 4-4
IXo VoltageRange, 4-4