Rockwell Automation 20M LPM15 Liquid-Cooled Adjustable Frequency AC Drive FRN 2.xxx - Manual (Page 20)

1-8 Installation/Wiring
DPI Communication Port
The Communication Interface PCB contains an eight-position, female,
locking mini-DIN connector that is used as a DPI communication port. This
port (DPI Port 3 shown in
Figure 1.4 below) provides communication
between the LPM15 drive and another DPI device (for example, a HIM).
Figure 1.4 DPI Communication Interface Board
For more information regarding operating LPM15 drives with a HIM, refer
to
Appendix C .
Determining Total Area Required Based on Drive Dimensions
Drive dimensions and weights are listed in Table 1.B . Overall drive
dimensions are illustrated in Figure 1.5 , Figure 1.6 , and Figure 1.7 as an aid
in calculating the total area required by the LPM15 drives.
Table 1.B Drive Dimensions and Weights
DPI Port 3
INV. STATUS
Rockwell Automation
LPM15 Drive
Catalog Number
(positions 1-7 only)
Frame Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Weight
20MD414 B 573 mm
22.54 in 800 mm
31.52 in 357 mm
14.06 in 397 mm
15.63 in 711 mm
28.00 in 39 mm
1.53 in 20 mm
0.79 in 125 kg
275 lb
20MD500 C 648 mm
25.53 in 1078 mm
42.44 in 352 mm
13.86 in 464 mm
18.25 in 787 mm
31.00 in 28 mm
1.09 in 160 mm
6.31 in 171 kg
378 lb
20MD643 C 648 mm
25.53 in 1078 mm
42.44 in 352 mm
13.86 in 464 mm
18.25 in 787 mm
31.00 in 28 mm
1.09 in 160 mm
6.31 in 171 kg
378 lb
20MD1K2 D 1010 mm
39.75 in 1245 mm
49.00 in 360 mm
14.16 in 838 mm
33.00 in 1200 mm
47.25 in 29 mm
1.12 in 25 mm
1.00 in 386 kg
850 lb