Motor control file, Motor control file -7 – Rockwell Automation 20M LPM15 Liquid-Cooled Adjustable Frequency AC Drive FRN 2.xxx User Manual
Page 55
Programming and Parameters
3-7
Motor Control File
Fil
e
Gr
oup
No.
Parameter Name & Description
for symbol descriptions
Values
Related
MO
T
O
R C
O
NTR
O
L
Motor D
ata
040
[Motor Type]
Set to match the type of motor connected.
(1)
Important: Selecting option 1 or 2 also requires selection of “Custom
V/Hz,” option 2 in parameter 53.
Default:
Options:
0
0
1
2
“Induction”
“Induction”
“Synchr Reluc”
(1)
“Synchr PM”
(1)
041
[Motor NP Volts]
Set to the motor nameplate rated volts.
Default:
Min/Max:
Units:
Based on Drive Rating
0.0/[Rated Volts]
0.1 VAC
042
[Motor NP FLA]
Set to the motor nameplate rated full load amps.
Default:
Min/Max:
Units:
Based on Drive Rating
0.0/[Rated Amps]
× 2
0.1 Amps
043
[Motor NP Hertz]
Set to the motor nameplate rated frequency.
Default:
Min/Max:
Units:
Based on Drive Cat. No.
5.0/400.0 Hz
0.1 Hz
044
[Motor NP RPM]
Set to the motor nameplate rated RPM.
Default:
Min/Max:
Units:
1750 RPM
60/2400 RPM
1 RPM
045
[Motor NP Power]
Set to the motor nameplate rated power.
Default:
Min/Max:
Units:
Based on Drive Rating
0.00/100.00
0.01 kW/HP
See
046
[Mtr NP Pwr Units]
Selects the motor power units to be used.
Default:
Options:
0
1
Drive Rating Based
“Horsepower”
“kiloWatts”
047
[Motor OL Hertz]
Selects the output frequency below which the motor operating current is
derated. The motor thermal overload will generate a fault at lower levels
of current.
Default:
Min/Max:
Units:
Motor NP Hz/3
0.0/Motor NP Hz
0.1 Hz
,
220
048
[Motor OL Factor]
Sets the operating level for the motor overload.
Default:
Min/Max:
Units:
1.00
0.20/2.00
0.01
,
220
To
rq
Attrib
utes
053
[Torque Perf Mode]
Sets the method of motor torque production.
Default:
Options:
0
0
1
2
3
“Sensrls Vect”
“Sensrls Vect”
“SV Economize”
“Custom V/Hz”
“Fan/Pmp V/Hz”
054
[Maximum Voltage]
Sets the highest voltage the drive will output.
Default:
Min/Max:
Units:
Drive Rated Volts
Rated Volts x 0.25/Rated Volts
0.1 VAC
055
[Maximum Freq]
Sets the highest frequency the drive will output. Refer to parameter 083
[Overspeed Limit].
Default:
Min/Max:
Units:
110.0 or 130.0 Hz
5.0/420.0 Hz
0.1 Hz
083
056
[Compensation]
Enables/disables correction options.
32
Motor FLA x OL Factor = Operating Level
1
0
x
x
x
x
x
x
x
x
x
x
x
x
x
10
1
2
3
4
5
6
7
8
9
11
12
13
14
15
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
Enab
le Jerk
Ixo A
utoCalc
Reflected W
ave
0
0