Rockwell Automation 20M LPM15 Liquid-Cooled Adjustable Frequency AC Drive FRN 2.xxx User Manual
Page 57
![background image](/manuals/576978/57/background.png)
Programming and Parameters
3-9
MO
T
O
R CO
NTR
O
L
Vo
lt
s p
er
H
er
tz
069
[Start/Acc Boost]
Sets the voltage boost level for starting and acceleration when “Custom
V/Hz” mode is selected. Refer to parameter 083 [Overspeed Limit].
Default:
Min/Max:
Units:
Based on Drive Rating
0.0/[Motor NP Volts]
× 0.25
0.1 VAC
070
[Run Boost]
Sets the boost level for steady state or deceleration when “Fan/Pmp
V/Hz” or “Custom V/Hz” modes are selected. See parameter 083
[Overspeed Limit].
Default:
Min/Max:
Units:
Based on Drive Rating
0.0/[Motor NP Volts]
× 0.25
0.1 VAC
071
[Break Voltage]
Sets the voltage the drive will output at [Break Frequency]. Refer to
parameter 083 [Overspeed Limit].
Default:
Min/Max:
Units:
[Motor NP Volts]
× 0.25
0.0/[Motor NP Volts]
0.1 VAC
072
[Break Frequency]
Sets the frequency the drive will output at [Break Voltage]. Refer to
parameter 083.
Default:
Min/Max:
Units:
[Motor NP Hz]
× 0.25
0.0/[Maximum Freq]
0.1 Hz
Fil
e
Gr
oup
No.
Parameter Name & Description
See
page 3-2
for symbol descriptions
Values
Related