Rockwell Automation 20M LPM15 Liquid-Cooled Adjustable Frequency AC Drive FRN 2.xxx - Manual (Page 23)

Installation/Wiring 1-11
Figure 1.7 D-Frame Drive Dimensions
Verifying the Site Provides for Recommended Air Flow Clearances
Be sure there is adequate clearance for air circulation around the
user-supplied enclosure. A 6-inch minimum clearance is required wherever
vents are located in the cabinet.
Verifying Power Module Input Ratings Match Supplied Power
It is important to verify that plant power will meet the input power
requirements of the LPM15 drive’s Power Module circuitry. See
Table 1.A
for input power rating specifications. Be sure input power to the drive
corresponds to the drive nameplate voltage and frequency.
C
F
B
E
G
A
D
∅28.6
[
∅1.13]
Lifting
(4) Pl. 419.1
[16.50]
520.6
[20.50]
130.8
[5.15]
329.5
[12.97]
3.0
[0.12]
Thick
∅14.3
[ ∅0.56]
(6) Pl.
Outlet Inlet
Dimensions are in
millimeters and [inches]