Rockwell Automation 22-COMM-D DeviceNet Adapter - Manual (Page 11)

Chapter
1
Getting Started
The 22-COMM-D DeviceNet adapter is a communication option
intended for installation into a PowerFlex 40 drive. It can also be used
with other Allen-Bradley products that support an internal DSI adapter.
The Multi-Drive feature (
Chapter 7 ) also provides a means for
PowerFlex 4 drives and other DSI Hosts to connect to DeviceNet.
Figure 1.1 Components of the Adapter
Topic Page Topic Page
Components 1-1 Safety Precautions 1-4
Features 1-2 Quick Start 1-5
Compatible Products 1-3 Modes of Operation 1-6
Required Equipment 1-3
Components
Item Part Description
➊
Status
Indicators Three LEDs that indicate the status of the connected drive,
adapter, and network. Refer to
Chapter 8 , Troubleshooting .
➋ DSI Connector A 20-pin, single-row shrouded male header. An Internal
Interface cable is connected to this connector and a connector
on the drive.
➌ DeviceNet
Connector A 5-pin connector to which a 5-pin linear plug can be connected.
➍ Node Address/
Rate Switches Switches for setting the node address and network data rate.
Refer to
Chapter 2 , Installing the Adapter .
➎
Mode Jumper
(J2) Selects Single or Multi-Drive mode of operation. Refer to
Chapter 2 , Installing the Adapter .
➊
➋
➌
➍
➎