Rockwell Automation 22-COMM-D DeviceNet Adapter - Manual (Page 28)

3-4 Configuring the Adapter
To go online with RSNetWorx for DeviceNet
You can view the devices on a DeviceNet network by going online. A
device may appear as an unrecognized device if RSNetWorx for
DeviceNet does not have an EDS file for it.
Figure 3.2 Example DeviceNet Network
Step Icons
1. After setting up a driver in RSLinx, start RSNetWorx for
DeviceNet.
2. Select Network > Online. If the Browse for Network dialog
box appears, RSLinx has multiple drivers configured.
Select your DeviceNet network, and click OK. A prompt
appears.
3. RSNetWorx browses the network and any devices on the
network appear in the Configuration View. You can select
Graph, Spreadsheet, or Master/Slave views.
Figure 3.2
shows an example network in a Graph view.
Shortcut to
RSNetWorx