Rockwell Automation 22-COMM-D DeviceNet Adapter - Manual (Page 13)

Getting Started 1-3
The DeviceNet adapter is compatible with Allen-Bradley PowerFlex
drives and other products that support an internal DSI adapter. At the
time of publication, compatible products include:
• PowerFlex 40 drives
The Multi-Drive feature ( Chapter 7 ) also provides a means for
PowerFlex 4 drives and other DSI Hosts to connect to DeviceNet.
Equipment Shipped with the Adapter
When you unpack the adapter, verify that the package includes:
User-Supplied Equipment
To install and configure the DeviceNet adapter, you must supply:
Compatible Products
Required Equipment
❑ One DeviceNet adapter
❑ One five-pin linear DeviceNet plug
(connected to the DeviceNet connector on the adapter)
❑ A 15.24 cm (6 in.) Internal Interface Cable
❑ One grounding wrist strap
❑ This manual
❑ A small flathead screwdriver
❑ DeviceNet cable
– Thin cable with an outside diameter of 6.9 mm (0.27 in.) is
recommended
❑ Configuration tool, such as:
– PowerFlex 4-Class HIM (22-HIM-*)
– DriveExplorer (version 3.01 or higher)
– DriveTools 2000 (version 1.01 or higher)
– RSNetWorx for DeviceNet
– Serial Converter (22-SCM-232)
❑ Computer with a DeviceNet communications adapter installed
(Examples: 1784-PCD, 1784-PCID, 1784-PCIDS, or 1770-KFD)
❑ Controller configuration software
(Examples: RSLogix5, RSLogix500, or RSLogix 5000)