Rockwell Automation 22-COMM-D DeviceNet Adapter - Manual (Page 30)

3-6 Configuring the Adapter
To access and edit parameters
Parameters in the drive and adapter can be edited with RSNetWorx. The
adapter parameters are appended to the list of drive parameters.
Figure 3.4 Example PowerFlex Drive Dialog Box
Step Icons
1. After creating an EDS file, right-click on the icon for the
PowerFlex drive and adapter and select Properties. The
PowerFlex Drive dialog box appears.
2. Click the Parameters tab ( Figure 3.4 ). If an EDS Editor
message appears, click Upload to load the parameter
values in the drive to the computer.
Parameters are displayed in numerical order. You can
either scroll through the list or select a specific group of
parameters in the Groups box. The available groups and
the numbers of the adapter parameters will vary based on
the type of drive that is connected to the adapter.
3. In the Current Value column, double-click a value to edit it.
4. Click Apply to save changes to the device.