Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 143)

Rockwell Automation Publication 750-RM002B-EN-P - September 2013 143
Feedback and I/O Chapter 2
Example
For this example, our setup includes a PowerFlex 755 utilizing a 20-750-2262C-
2R 24VDC I/O Option Module and a ControlLogix™ L63 processor. The drive’s
Option Module, P10 [RO0 Sel] is configured for Port 7: Dig Out Setpoint.Relay
Out 0. We are utilizing the Logix Designer application, which includes the Drives
Add-On Profiles (AOPs). This gives us the ability to communicate and control
the PowerFlex 755 drive over its embedded ethernet port via a datalink P7 [Dig
Out Setpoint], Relay Out 0.
Below is a picture of the PowerFlex 755 drive Datalink configuration.
Below is a picture of the PowerFlex 755 drive Datalink configuration from
DriveExecutive™.<span id=”fck_dom_range_temp_1332343477042_759” />