Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 300)

300 Rockwell Automation Publication 750-RM002B-EN-P - September 2013
Chapter 6 Integrated Motion on the EtherNet/IP Network Applications for PowerFlex 755 AC Drives
Additional Resources for
Integrated Motion on the
EtherNet/IP Network
Information These documents contain additional information on the Integrated Motion on
the EtherNet/IP Network for PowerFlex 755 AC drive applications.
You can view or download publications at
http:/www.rockwellautomation.com/literature/ . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Software Tools
Integrated Architecture Builder can be downloaded at:
http://www.rockwellautomation.com/en/e-tools/configuration.html
Motion Analyzer can be downloaded at: http://motion-analyzer.com/
Resource Description
PowerFlex 750-Series Drive Programming Manual,
publication
750-PM001
Provides detailed information on:
• I/O, control, and feedback options
• Parameters and programming
• Faults, alarms, and troubleshooting
PowerFlex 750-Series Drive Installation Instructions,
publication
750-IN001
Provides instructions for:
• Mechanical installation
• Connecting incoming power, the motor, and basic
I/O
PowerFlex 750-Series Drive Technical Data,
publication
750-TD001
Provides detailed information on:
• Drive specifications
• Option specifications
• Fuse and circuit breaker ratings
Integrated Motion on the Ethernet/IP Network User Manual,
publication
MOTION-UM003
Use this manual to configure an Integrated Motion on
the Ethernet/IP network application and to start up
your motion solution using the ControlLogix™ system.
Logix5000 Controllers Motion Instructions Reference
Manual, publication
MOTION-RM002
Provides details about the motion instructions that are
available for a Logix5000 controller.
Kinetix® Motion Control Selection Guide,
publication
GMC-SG001
This selection guide is meant to help make initial
decisions for the motion control products best suited for
your system requirements. In addition, there are
technical data publications with product specifications
and design guide publications with selection
information, specific to each drive family, to determine
the accessories needed for your application.
The design guides also include the recommended
motor cables, performance specifications, and torque/
speed (rotary) and force/velocity (linear) curves for
each drive and motor/actuator combination.