Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 310)

310 Rockwell Automation Publication 750-RM002B-EN-P - September 2013
Chapter 6 Integrated Motion on the EtherNet/IP Network Applications for PowerFlex 755 AC Drives
2. Open the PowerFlex 755 drive module and click the Associated Axis tab.
3. From the Axis 1 pull-down menu, choose the feedback axis you created
(Dual_Loop_Axis in this example).
4. From the Motor/Master Feedback Device pull-down menu, choose Port 5
Channel A.
5. From the Load Feedback Device pull-down menu, choose Port 4 Channel
A.
6. Click OK.