Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 57)

Rockwell Automation Publication 750-RM002B-EN-P - September 2013 57
Drive Configuration Chapter 1
Flying Start - Sweep Slope A
This plot shows when the drive starts to sweep for the spinning motor, the
frequency sweep has a certain slope associated with it. By modifying P359 [FS
Speed Reg Ki] you can change the slope of this sweep.
Flying Start - Sweep Slope B
This plot shows the result of increasing P359 [FS Speed Reg Ki]. The slope is
extended.
PowerFlex 753 Flying Start - Sweep Slope A
Note the slope of the frequency sweep.
Adjust P359 [FS Speed Reg Ki]
Frequency Speed Current
PowerFlex 753 Flying Start - Sweep Slope B
Note the slope of the frequency sweep.
Adjust P359 [FS Speed Reg Ki]
Frequency Speed Current