Using an incremental encoder with an mpx motor, Using an incremental encoder with an mp, Using an incremental encoder with an mp x motor – Rockwell Automation 20G PowerFlex 750-Series AC Drives User Manual
Page 372
Advertising
372
Rockwell Automation Publication 750-RM002B-EN-P - September 2013
Chapter 6
Integrated Motion on the EtherNet/IP Network Applications for PowerFlex 755 AC Drives
Using an Incremental
Encoder with an MPx Motor
The PowerFlex 755 drive supports incremental encoder feedback when using a
Rockwell Automation MP
x motor. However, the Motor Device Specification
category in the Axis Properties configuration for the Logix Designer application
does not currently support MP-Series™ motors with incremental feedback catalog
numbers, as shown below. Only MP-Series motors with the suffix –M (Stegmann
Multi-turn Absolute), or –S (Single Turn Absolute) motors are supported.
Advertising
This manual is related to the following products: