Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 101)

Publication 1753-PM001A-EN-P - November 2005
Programming Software Versions, Compatibility, and Firmware Updates A-3
RSLogix Guard PLUS!
Software and GuardPLC
Firmware Compatibility RSLogix Guard PLUS! Software and Associated GuardPLC
Firmware Versions
The table below describes the firmware version associated with each
major release of RSLogix Guard PLUS! Software. Backward
compatibility is maintained so that user programs developed using an
earlier version of RSLogix Guard PLUS! software will work with later
versions of GuardPLC firmware.
Programming Software Version GuardPLC Platform and Firmware
Version New Functionality
RSLogix Guard
Project Manager version 3.3 Build 4903
Hardware Manager version 2.2.12 GuardPLC 1200 and GuardPLC 2000
Series A CPU Firmware version 1.04
Series A COM Firmware version 1.00
GuardPLC 1200 and GuardPLC 2000
Series B CPU Firmware version 2.04
Series B COM Firmware version 2.80
Initial release
Added peer-to-peer communications
RSLogix Guard PLUS!
Project Manager version 3.5 Build 6817
Hardware Manager version 4.0.26 GuardPLC 1200 and GuardPLC 2000
Series C CPU Firmware version 4.32
Series C COM Firmware version 4.24
GuardPLC 1600 and GuardPLC 1800
Series A CPU Firmware version 4.32
Series A COM Firmware version 5.14
GuardPLC DIO Firmware 4.28
Added support for GuardPLC Ethernet
Distributed I/O modules
Added support for GuardPLC 1600 and
GuardPLC 1800
RSLogix Guard PLUS!
Project Manager version 4.0 Build 6104
Hardware Manager version 6.56.0 GuardPLC 1200 and GuardPLC 2000
Series C CPU Firmware version 6.12
Series C COM Firmware version 8.32
GuardPLC 1600 and GuardPLC 1800
Series B CPU Firmware version 6.12
Series B COM Firmware version 8.32
GuardPLC DIO Firmware 6.12
GuardPLC 1200 and GuardPLC 2000 do not
support the 1753-DNSI DeviceNet Safety
Scanner.
Added support for 1753-DNSI DeviceNet
Safety Scanner (GuardPLC 1600 and
GuardPLC 1800 only)
RSLogix Guard PLUS!
Project Manager version 4.1 Build 6111
Hardware Manager version 7.56.10 GuardPLC 1200 and GuardPLC 2000
Series C CPU Firmware version 6.28
Series C COM Firmware version 8.32
GuardPLC 1600 and GuardPLC 1800
Series C CPU Firmware version 6.28
Series C COM Firmware version 10.36
GuardPLC DIO Firmware 6.28
Added support for 4 new distributed I/O
modules and the 1753-HHT hand-held
terminal.
Added EtherNet/IP communications for
GuardPLC 1600 and GuardPLC 1800
controllers.