Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 52)

Publication 1753-PM001A-EN-P - November 2005
3-12 Create a GuardPLC Project
2. Create a Count signal for counter value.
Connect Configuration Signals and Counter Value Signals
1. Right-click the GuardPLC 1800 controller’s high speed counters
(HSC2) and choose Connect Signals to open the Signal
Connections dialog.
2. Choose the Outputs tab.
3. Connect the True and False signals to the counter outputs to
configure the desired counter behavior.