Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 19)

Publication 1753-PM001A-EN-P - November 2005
Connect to the GuardPLC Controller 1-9
Step 4: Get Communication Settings
1. Choose Online>Communication Settings from the pull-down
menu.
2. Enter the last three elements of the MAC address into the MAC
Address field and click Get.
The MAC address is on the sticker on the side of a GuardPLC
1200 controller, on the label positioned over both lower RJ-45
connections on GuardPLC 1600/1800 controllers and I/O, or on
the front bezel of the AB-CPU module of a GuardPLC 2000
controller.
The IP address and SRS of the GuardPLC controller should
appear in the Address PES using…
fields.
TIP
If communication fails, you may need to
disable your fire wall or security settings.