Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 95)

Publication 1753-PM001A-EN-P - November 2005
Create User-Defined Function Blocks 8-9
Move Declared Variables to
the User-Defined Function
Block Page In order to use these declared variables, you must:
1. Drag them from the Variable Definition Editor to the
user-defined function block page.
2. Drag down the required function blocks and make all the
necessary connections.
To use the completed user-defined function blocks, you must drag
them to the function block page and connect signals to them.