Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 16)

Publication 1753-PM001A-EN-P - November 2005
1-6 Connect to the GuardPLC Controller
Step 1: Open RSLogix Guard PLUS! Software
Choose Start>Programs>RSLogix Guard PLUS>RSLogixGuardPLUS.
Step 2: Create a New Project
Open an existing project or create a new project that contains a
GuardPLC controller.
1. To create a new project, choose Project>New from the main
menu or click the New icon.
2. Enter the name of the project in the Object Name field.
3. Click OK.