Run an off-line simulation -18, Run an off-line simulation – Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 58
Advertising
Publication 1753-PM001A-EN-P - November 2005
3-18 Create a GuardPLC Project
Run an Off-Line Simulation
To test the code before downloading it to the GuardPLC controller,
run an off-line simulation:
1. Right-click Resource and choose OFF-Line-Simulation.
The OLS tab appears.
2. Double left-click [I] TypeInstance.
The following appears.
Advertising
This manual is related to the following products: