Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 61
Advertising
Publication 1753-PM001A-EN-P - November 2005
Create a GuardPLC Project 3-21
8. Left-click on the Download icon.
9. Answer Yes to the warning prompt.
10. Make sure the download was successful by checking the Status
Field for a ‘Resource Configuration successfully loaded’
message.
11. Put the GuardPLC controller into RUN mode by clicking the
Coldstart button and answering Yes to the warning prompt.
Advertising
This manual is related to the following products: