Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 49)

Publication 1753-PM001A-EN-P - November 2005
Create a GuardPLC Project 3-9
d. Connect USED to the DI channels being used: DI[17].Used,
and DI[18].Used
5. Close the DI Signal Connections window.
Connect Output Signals
1. Right-click the controller’s outputs (DO8) or a Distributed I/O
module and choose Connect Signals.
2. The Signal Connections window defaults to the Inputs tab.
Choose the Outputs tab to view the output fields.
3. Connect the MOTOR signal to the first output, as shown below.