Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 8)

Publication 1753-PM001A-EN-P - November 2005
viii Table of Contents
Appendix B
Configure the GuardPLC OPC
Server In This Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Choose an IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Add the GuardPLC Controller and the OPC Server to the
Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Configure the GuardPLC System for OPC Communication. . B-3
Configure the Communication Network . . . . . . . . . . . . B-3
Connect Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
Set the System Properties . . . . . . . . . . . . . . . . . . . . . . . B-6
Generate Code for the OPC Server. . . . . . . . . . . . . . . . . . . B-8
Go Online with the Controller . . . . . . . . . . . . . . . . . . . . . . B-8
Use the OPC Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8
Appendix C
Create a Time-based Variable
Index