Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 21
Advertising
![background image](/manuals/579631/21/background.png)
Publication 1753-PM001A-EN-P - November 2005
Connect to the GuardPLC Controller 1-11
The IP address and SRS should have changed. A prompt appears at
the bottom of the window and the settings in the middle fields
change.
Step 6: Move the Settings Into Your Offline Project
If you wish to connect using the current GuardPLC controller settings,
move the settings into your offline project.
1. Left-click -> Project.
Advertising
This manual is related to the following products: