Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 40)

Publication 1753-PM001A-EN-P - November 2005
2-6 Connect to GuardPLC Distributed I/O Modules
4. To change the IP address and SRS settings, enter the new data
into the Communication Settings fields.
5. Click the Set via MAC button.
6. Enter Administrator in the User Name field and click OK.
The new IP address and SRS settings are shown in the Address
PES using … fields.
7. Close the Communication Settings dialog by clicking the Cancel
button.