Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 66)

Publication 1753-UM001B-EN-P - November 2005
4-2 Check, Download, Start, and Test a Routine
Download a Routine 1. Choose Online>Control Panel.
The software automatically asks you to log in.
2. After you successfully log in, the Control Panel opens.
3. The routine must be stopped before downloading is permitted.
Choose Resource>Stop.
4. Choose Resource>Download to load the routine into the
controller.
Download Coldstart
Stop
IMPORTANT
If your controller is in FAILURE_STOP, it must be
rebooted before you can download a routine. While
online with the controller, choose Reboot Resource
from the Control Panel.
For more information on recovering from a
FAILURE_STOP, refer to the GuardPLC Controller
Systems User Manual, publication number
1753-UM001.