Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 37)

Publication 1753-PM001A-EN-P - November 2005
Connect to GuardPLC Distributed I/O Modules 2-3
3. Click New….
The Create HH Network dialog appears.
4. Click OK.
The Specify HH Network window reappears showing the
selected network.
5. Click OK to confirm your selection.
The distributed I/O module now appears in the project tree.
Configure the Module To configure the module, you need to:
• set I/O properties
• configure the offline IP address